12197 verified suppliers listed
C
CNC Machining Shops

Best EDM Machining Shops in California

Electrical discharge machining (EDM) is the process of choice when conventionally machined features are impossible or impractical: wire EDM cuts hardened tool steel with precision impossible to achieve by milling, sinker EDM burns complex cavity shapes into hard materials, and small-hole EDM drills cooling holes in turbine blades where conventional drills cannot reach. California's aerospace, defense, medical device, and semiconductor equipment industries generate sustained demand for EDM capability. The EDM shops listed here operate wire, sinker, and small-hole EDM equipment and have the engineering expertise to optimize electrode design, cutting conditions, and surface integrity for demanding applications.

Why these suppliers?

  • ✓California's aerospace and semiconductor equipment industries drive unique EDM demand — turbine blade cooling hole drilling, hard-to-machine alloy features, and ultra-precise cavity work that CNC milling cannot achieve at hardened material states.
  • ✓Wire EDM is the preferred method for precision profile cutting of hardened dies, medical device components, and electronic connector contacts in California's precision parts supply chain, offering burr-free edges and ±0.0001″ accuracy on complex profiles.
  • ✓California EDM shops serving the semiconductor equipment industry have exceptional surface integrity expertise — EDM recast layer management, spark erosion optimization, and post-EDM finishing protocols that meet the stringent cleanliness requirements of semiconductor fab environments.

No suppliers found for this filter combination yet.

We are continuously adding and verifying new suppliers. Submit an RFQ and we will connect you with qualified providers.

Request a Quote

Frequently Asked Questions

What are the main types of EDM and when is each used?
Wire EDM uses a continuously fed wire electrode (typically 0.010″ brass or coated wire) to cut complex 2D profiles through electrically conductive materials, with no contact and no cutting force — ideal for hardened steel, Inconel, and carbide. Sinker EDM (ram or die-sinking EDM) uses a shaped electrode to erode complex 3D cavities into workpieces, used for injection mold cavities, die features, and blind pockets in hard materials. Small-hole EDM (fast-hole drilling) uses a rotating tubular electrode with flushing coolant to drill precise small holes (0.010–0.120″ diameter) in hardened materials, commonly used for turbine blade cooling holes and start holes for wire EDM.
What materials can California EDM shops machine?
EDM works on any electrically conductive material regardless of hardness: hardened tool steels (D2, H13, M2), carbide, Inconel and nickel superalloys, titanium, stainless steel, cobalt-chrome, and copper alloys. This hardness-independence is EDM's key advantage — features that cannot be milled in hardened steel can be EDM'd with high precision. Materials that cannot be EDM'd include non-conductors (ceramics, plastics, composites) and very low conductivity metals. For California aerospace applications, Inconel 718 and titanium EDM are common for features in hardened or fully machined states.
What accuracy can I expect from California wire EDM shops?
High-quality wire EDM machines in California shops achieve positional accuracy of ±0.0001″ (±0.0025 mm) and surface finishes as fine as 8–12 Ra μin with multiple skim cuts. For profile tolerances, ±0.0002–0.0005″ is routine production capability; tighter tolerances to ±0.0001″ are achievable on temperature-controlled premium machines. Surface integrity (recast layer thickness) is typically 0.0005–0.002″ for roughing and can be reduced to under 0.0001″ with finish skim cuts — important for fatigue-critical aerospace applications where EDM recast layers can initiate cracks.